15
Step 3: During Play
PinCollect
PinCollect is a simple feature that allows
you to get the most out of your statistics by
collecting the position of the pin. When you
reach a green, your watch will automatically
change to the PinCollect screen. This screen
shows the numbers 1-4, which represent
the number of putts taken on the hole. Once
you have holed out, simply press the number
which correlates the number of putts taken,
over the hole, and the pin location will
be saved.
PinCollect
What if I forget to PinCollect?
Don’t worry if you forget to PinCollect occasionally. Although
the watch will remind you to do so on every green, forgetting is
still easily done! If you do forget, you can add the pin position in
editing and move your putts as required.
Holes
Scrolling between holes
When you go to a new hole, the watch
should automatically move onto the
next hole.
You can scroll between holes by using the
bottom left and right buttons.
Lost GPS
Lost GPS signal
If the watch loses GPS signal during the
round you will be notied on the screen.
The watch will automatically start to
search for GPS and, if this happens, you
can simply wait and the screen will return
to yardages.
If you want to end the round at this point
press the bottom right button. This will
return the watch to the home screen.
Top Tip: PinCollect is the only way that we can determine
where the pin is on any given day. So if you don’t use PinCollect,
we have no way of knowing whether your approach/chip was 30ft
or 10ft away.
To Next Page
Loading...
Need help?
General
