Cleaning and Maintenance
It is recommended that your shower chair and accessories are serviced annually by your Showerbuddy
Dealer or an authorised, competent service agent. In addition:
1. Regularly inspect all parts of the kit for defects. Any defective part should be attended to promptly by an
authorised service agent.
2. Clean the seat using a damp cloth and a mild cleanser. Always read the manufacturers instructions prior
to applying the cleanser. When using Sodium Hypochlorite (Bleach) on the seat, a solution of 0.1% Sodium
Hypochlorite should have no adverse effects on the cleaning of chairs. However, when using a solution of
1.0%, care should be taken to rinse the chairs thoroughly with clean water after application. Over a period
of time bleaching may occur, but the integrity of the product will remain unaffected.
3. Dry off the shower chair after use.
4. Do not oil or grease any parts.
5. Keep any moving parts free from lime scale, soap residue and hair by cleaning after use in the shower.
Caring for stainless steel.
Stainless steel has excellent corrosion resistance, but it is not stain or rust proof. Regular maintenance will
keep stainless steel clean and free of contaminants. In most applications stainless steel will not rust or stain
even after many years of service, but when used in certain environments such as concentrated chlorine or
other corrosive elements stainless steel requires proper care and maintenance. Do not leave stainless in
contact with iron, steel or other metals.
1. Clean stainless steel frequently with soap and water. Any cleaner safe for glass is usually safe for
stainless steel; apply with a cotton cloth.
2. Use a coating such as a good wax to help safeguard the stainless steel.
3. Remove discolouration or rust spots as soon as possible with a brass, silver or chrome cleaner. Irrevers-
ible pitting will develop under rust that remains on stainless steel for any period of time. Apply a mild
cleaner such as Ajax or an equivalent with a wet cotton cloth. Rinse thoroughly and wipe dry. Do not use
abrasives such as sandpaper or steel wool on stainless steel.
4. Do not clean with mineral acids or bleaches.
5. Do not store near any chlorine product.
Safety Instructions
Safety Warning!
Failure to comply with these safety instructions may result in injury or damage!
It is important that the user(s), and/or the caregivers of the user(s), learn how to safely operate the Pediatric
kit on their shower chair.
The following must be read before using the shower chair to ensure the safe operation.
The Owner(s) Manual must be read and understood before using the shower chair. If you
don’t understand any parts of the Owner(s) Manual, clarification should be sought prior to using the
product.
For further clarification of any part of the Owner(s) Manual call your local dealer or visit
www.showerchairs.co
Transfers to and from the Showerbuddy shower chair can be dangerous. Consult a Physical or
Occupational Therapist to ensure safe and reliable transfer techniques is practiced.
Individuals who have not learned these skills must have assistance during transfers.
Do not use the Showerbuddy shower chair for any application outside of the manufacturers intended use,
this can result in damage to the shower chair and components. Not complying with the manufacturer’s
instructions can result in injury to the user(s) or caregiver. Showerbuddy will not be held responsible for any
injury or damage resulting from the misuse or inappropriate operation of the Showerbuddy shower chair.
If any part of the Showerbuddy P1 or P2 kit requires maintenance please don’t hesitate to contact your
dealer. Any problems that could affect the safe operation of the chair MUST be attended to immediately.The
MAXIMUM user weight for this Showerbuddy P1 & P2 kit is: 66lbs (30kg) & 200lbs (90kg) respectively.
ALWAYS ensure that your Showerbuddy shower chair is capable of manoeuvring over surfaces that will be
encountered prior to operating the shower chair with any user(s). This chair is only intended for use
indoors, on flat surfaces, without thresholds, steps, curbs or obstacles.
ALWAYS lock the castor wheels when the chair is stationary. To do this step-on the lever that activates the
wheel locks.
DO NOT lean forward or sideways out of the shower chair as this may cause the chair to tip.
DO NOT STAND or step on the footrest, as the chair will tip forward possibly causing injury to the User. The
footrests are not load bearing and are not intended or designed as a step.
DO NOT wheel the shower chair down an incline without a caregiver who can control the chair during its
descent.
DO NOT use the shower chair castor wheel locks as brakes when travelling down inclines.
DO NOT position the Showerbuddy shower chair sideways on a slope as this could cause it to tip.
Important!
Although every effort has been made by the Showerbuddy team to ensure the stability of the Showerbuddy
shower chairs during use, it is important to recognize that the most dangerous part of using any shower
chair is the transfer. If you are unsure of how to perform transfers in a way that can be performed safely,
then contact a Physical or Occupational Therapist who is familiar with transfer techniques and options.
The wheel locks on the castors are designed to prevent the castor wheels from rotating when the shower
chair is stationery. These DO NOT and CANNOT prevent the wheels from sliding if the floor is slippery. A
slippery floor can be caused by dust, water, soap or any substance that doesn’t allow the tires (tyres) to
grip. Transfers should never be attempted with the Showerbuddy shower chair positioned on slippery
surfaces since the wheel locks can only prevent the wheels from rotating. It is recommended that transfers
be performed on clean, dry non slippery surfaces. When transferring onto a Showerbuddy Shower Chair
always lock all castors in their outward position (front castors positioned in the forward and out position /
rear castors positioned to the rearward and out position) for maximum chair stability.
Never use the foot rest to assist with transfers. This could cause the chair to tip forward. The footrest should
be folded away during transfers to provide unobstructed access to the shower chair.
DO NOT stand on the footrest as this is designed to provide support for the user’s feet while seated and not
to act as a load bearing component when the user mounts or alights from the chair. Standing on the
footrests could cause the chair to tip forward.
The fasteners – Knobs, nuts, bolts, washers – should be checked periodically to ensure that they are
securely fastened. Your dealer should be called to check the fasteners and other components at least once
per year.
All Showerbuddy shower chairs are supplied with chest and lap restraining belts that ensure the correct and
safe operation of the shower chair for both the user(s) and the caregiver. It is important that these straps
are used every time the shower chair is operated. Your Showerbuddy P1 & P2 kit can use these existing
straps so that these can be easily and effortlessly attached. See page 8
Important!
ADJUSTMENTS SHOULD NEVER BE ATTEMPTED WITH THE
USER(S) IN THE CHAIR!
Your authorized Showerbuddy dealer can help you with any adjustments you may want to make on your
Showerbuddy shower chair or can provide clarification on any of the information contained herein.
Heavy Object
To avoid muscle strain or back injury, use lift aids and proper lifting techniques when lifting or moving this
product
10
P1 & P2 Pediatric Conversion Kit
To Next Page
Loading...