Showerbuddy SB3T - Operation Step 3: Neck Rest Adjustment; Operation Step 4: Neck Rest Handle Positioning

Showerbuddy SB3T
step 4
step 3
page 13
Before using the chair adjust the neck rest
so that it provides the correct support for
the intended user. Unscrew the neck rest
handles to allow the tubes to easily slide
for adjustment.
Secure the neck rest in the correct
position by securely tightening the neck
rest handles.
NOTE
- Ensure both handles are securely
tightened prior to use to prevent the neck
rest moving.
After adjusting the neck rest you can
adjust the position of the neck rest handle
to prevent it sticking out.
To do this pull the handle to the right and
then rotate. This allows the handle to be
freely rotated without tightening or loos-
ening the neck rest. The handle will then
spring back into position when released.
This method can also be used when
tightening the neck rest .