Need help?Do you have a question about the Showerbuddy SB3T and is the answer not in the manual?
General| Product Type | Shower Chair |
|---|---|
| Model | SB3T |
| Weight Capacity | 300 lbs |
| Color | White |
| Material | Plastic |
| Features | Adjustable height, non-slip feet |
Insert back rest frame into seat base and secure with clip pins.
Insert and secure arm rests using knobs and clips, then lock them in position.
Slide armrest lock to swing armrest out or secure it in position.
Unlock armrests to swing them away. Clip pin stops excessive rotation.
Attach seat cushion by aligning lugs with connectors on the seat base.
Slide neck rest height adjustment tube and secure with handle.
Insert neck rest into sleeve and adjust height, securing with handle.
Drop footrests into tube holders, ensuring they are fully located.
Lift and spin footrest out of the slot to swing it away.
Unlock and rotate footrests outwards for access, inwards to reposition.
Lift footrest upwards to slide it out of the connector.
Slide commode bucket into brackets on seat base underside.
Attach lap belt using underside seat base attachment points.
Slide chest belt through back rest attachment loops and adjust length.
Adjust seat height using securing clips on base legs.
Attach calf straps to footrests by wrapping and connecting Velcro.
Adjust neck rest position and secure with handles.
Reposition neck rest handle by pulling and rotating.
Lock castor wheels by pressing down on brakes; unlock similarly.
Squeeze tilt handle to unlock struts and recline the chair.
Recline chair up to 30 degrees; tilt handle secures position.
Squeeze tilt handle to unlock struts and return chair to upright.
Support user weight when returning chair to upright position.
General safety warnings and maximum user weight limit for safe operation.
Guidelines for safe transfers, castor locking, and preventing tipping.
Critical safety notes on adjustments, restraints, and handling the product.
To Next Page