SHOWTEC Scanmaster 1 - Bank Copy

2. Operation Guide2. Operation Guide
2.2.4 Delete a Scene
2.2.5 Delete all Scenes
2.2.6 Bank Copy
1. Tap the desired Scene button to select the scene
you wish to delete.
2. Press and hold down the Auto/Del button.
While holding down the Auto/Del button, tap
the Scene button that stores the scene you
wish to delete.
When a programmed scene is deleted, all DMX
channel in this scene is set to 0.
1. With the power off, press and hold down the
Program and Bank Down buttons at a time.
2. Apply power again, all scenes should be cleared.
Program
1. Program enable.
1615
SCENE
SCENE
Auto/Del
BANK
2. Tap the Bank Up/Down button to select the
bank you wish to copy.
4. Tap the Bank Up/Down button to select the
bank you wish to copy to.
MIDI/Rec
3. Tap the MIDI/Rec button.
BANK
BANK
This function will reset all DMX channel to 0 output.