5
Description of the device
Features
The Scanmaster 3 is a lightcontroller from Showtec.
• 192 DMX channels
• 12 Scanners of 16 channels each
• 30 Banks of 8 programmable scenes
• 6 Programmable chases of 240 scenes
• 8 Sliders for manual control of channels
• Assignable joystick for ease of channels
• File Dump allows data to be sent or received between two units
• Auto mode program controlled by speed and fade time sliders
• Fade time/Assign fade lime
• Reversible DMX channels allows fixture to react in opposition to others in a chase
• 8 CHANNEL or 16 CHANNEL mode
• Fine adjustment forjoystick pan and tilt
• Blackout master button
• Manual Override button allows you to grab any fixture on the fly
• Built in microphone for music triggering
• MIDI control over banks, chases and blackout
• DMX Polarity selector
• Power failure memory
NOTE: Knowledge of MIDI and DMX is required to fully utilize this unit.
Overview
Fig. 1
To Next Page
Loading...
