USER MANUAL
CREEPER ICE dry ice machine
★Please read this manual carefully before operating this product.
★Warranty card attached in the manual, please keep it well.
▲SAFETY CONSIDERATIONS
\ Unauthorized repair are prohibited, it may cause serious incident
\ Never store dry ice in sealed container, it may explosion due to dry ice sublimates to carbon
dioxide gas.
\ Never cover or block the nozzle when operation to avoid explosion due to the generation of
carbon dioxide gas.
\ Wear thick gloves when handling dry ice, do NOT handle with bare hands.
\ Do NOT swallow dry ice, it may lead to severe injuries.
\ Before breaking the dry ice, cover it with a piece of cloth or place it in a cloth bag, do wear
protective goggles.
\ Dry ice gives off carbon dioxide gas, which may cause difficulty breathing or suffocation. So
please make sure the space is well ventilated before operate CREEPER ICE machine, do NOT use
in confined space.
\ Make sure power supply in consistent with the rated voltage of the equipment, and the
socket must well grounded. Unplug and turn off the machine when not use.
\ The output nozzle is very hot when machine is running, do NOT touch it. Keep a minimum
distance of 2m from the nozzle to nearest object.
\ Do NOT use the product as a space heater.
\ Always disconnect the power connection before cleaning.
\ Empty the water tank before transport or storage the machine.
\ For safety reasons, please operate the product on horizontal ground only. Lock wheels to
keep from moving.
\ Use clean water as impurities may result in damage to the machine.
\ Do not operate product in ambient temperature higher than 50 .
\ Always install the machine in well ventilated place, at least 50cm space around the machine.
Do NOT cover the nozzle.
\ For adult use only, keep it away from children, fire, inflammable and explosive articles.
\ The area in front of machine may become wet during operation. Be aware of the slip ground.
\ If the machine fails to work, please stop operation and unplug the machine. Check fuse,
power cable and socket etc. carefully, if can’t solve the problem, please contact SHOWVEN
(info@showven.cn) or your local SHOWVEN partner for advise.
To Next Page
Loading...