▲Wireless Control
Wireless control is used to remote control the machine. Before use the wireless function please
make sure machine was ready, wireless status was ON, and no DMX cable connection.
Remote controller:
A. Fog output START
B. Fog output STOP
If the wireless remote is not working, please check the wireless function setup
on machine. Press “MENU” find “wireless control” switch it into “ON”, press
“ENTER” to save the setup. Remote control match with machine was also in
this interface, press any key on remote control for 1s, the LCD screen will blink
once, means the match was successful.
NOTE: Remote controller is optional configuration. You can buy it separately
from SHOWVEN or SHOWVEN authorized partners.
▲Product Package
CREEPER ICE CREEPER ICE PLUS
Main unit x 1unit Main unit x 1unit
Power Cable x 2 pieces Power Cable x 1 pieces
User Manual x 1 piece User Manual x 1 piece
Fog vent hose 3.3m x 1piece Fog vent hose 3.3m x 2 pieces
Flight case package Fog vent head x 2 pieces
Flight case package
To Next Page
Loading...