Shrinkfast 998 - Filter Cleaning Procedure; Spark Plug Replacement Guide

C. Assembly & Disassembly
GENERAL NOTES
1. Grease all “O” rings to facilitate assem-
bly.
2. Fitting (23) is glued permanently into
the valve body (22).
1. Filter Cleaning
1.1 Unscrew filter holder (1) using a screw
driver or a coin. Pull out the filter holder.
1.2 Pull out the filter screen/spring assem-
bly (3,4) and clean with compressed air or
replace.
2. Spark Plug Replacement
2.1 Depress button (31) and remove com-
bustor assembly (30)
2.2 Pull spark plug (28) and flame holder
(32) out with a pair of pliers.