To Next PageTo Next Page
Need help?Do you have a question about the SHUR-DRI SD-520-01 and is the answer not in the manual?
Critical instructions to prevent serious bodily injury or property damage during installation.
Important cautions regarding pump priming, discharge, and electrical hazards.
Procedure to measure the depth of your well to ensure proper pump selection and operation.
Guide to selecting the correct pump and setting the appropriate voltage for your system.
Instructions for correctly wiring the pump motor and making electrical connections.
Guidance on installing the necessary piping for the pump system, ensuring airtight connections.
Chart providing recommended wire gauges and fuse ratings based on pump model and distance.
Step-by-step instructions for installing shallow well pumps (SDTS5-01, SDTS10-01).
Detailed steps for priming shallow well jet pumps to ensure proper operation and prevent damage.
Specific instructions for installing pumps using a well point system.
Step-by-step instructions for installing deep well pumps (SD-520-01, SD-100-01 convertible).
Detailed steps for priming deep well jet pumps to ensure proper operation and prevent damage.
Checklist of common issues like priming failure, low capacity, motor overload, and their possible causes.
List of specific parts and kits for different pump models (SDTS, SD Series) and their corresponding key numbers.
Details on the limited warranty period, exclusions, and general terms for SHUR-DRI pump products.
General| Model | SD-520-01 |
|---|---|
| Category | Water Pump |
| Type | Submersible |
| Power Source | Electric |
| Voltage | 120V |
| Horsepower | 1/2 HP |
| Switch Type | Automatic |
| Max Head | 25 feet |
| Material | Thermoplastic |
| Discharge Size | 1-1/4 inch |
| Cord Length | 10 ft |
| Outlet Size | 1-1/4 inch |
