Need help?Do you have a question about the Shure BETA 98AMP and is the answer not in the manual?
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Output Impedance | 150 ohms |
| Connector | XLR |
| Sensitivity | -54 dBV/Pa (1.9 mV) |
| Power Requirements | Phantom Power (11-52V) |
Details on Beta 98AMP/C and Beta 98AMP/C-3PK configurations and included accessories.
Premier live performance mic with Shure quality, ruggedness, reliability, uniform cardioid pattern, tailored frequency response, wide dynamic range, compact design, flexible gooseneck, durable construction.
Aiming, mic quantity, spacing, phase, reflections, proximity effect, handling, grille coverage, and windscreen use.
Flexible gooseneck adjustments for precise placement. Avoid excessive twisting or forcing to prevent damage.
The Shure A75M mounts the Beta 98AMP on various surfaces and instrument hardware.
Exceptional low-frequency reproduction, high SPL handling, high output level, and no crossover distortion.
Recommends minimum input load impedance of 1000 Ω and requires 48 Vdc phantom power for optimal performance.
Details cartridge type, polar pattern, frequency response, output impedance, sensitivity, max SPL, signal-to-noise ratio, dynamic range, clipping level, self-noise, CMR, polarity, power requirements, and net weight.
Lists furnished and optional accessories for the Beta 98AMP, including mounts, clips, bags, and cables.
Eligible for CE Marking, conforms to EMC Directive, meets Harmonized Standards for residential and light industrial environments.
Illustrates the microphone's frequency response curve from 20 Hz to 20 kHz.
Shows polar response at different frequencies (250 Hz, 500 Hz, 1000 Hz, 2500 Hz, 6300 Hz, 10000 Hz).
Provides physical dimensions of the microphone head and overall length.
To Next Page
