Need help?Do you have a question about the Shure BETA 91A and is the answer not in the manual?
General| Type | Stage/performance microphone |
|---|---|
| RF power | 3.8 mW |
| Noise reduction | Yes |
| Microphone frequency | 20 - 20000 Hz |
| Microphone sensitivity | -48.5 dB |
| Microphone direction type | Cardioid |
| Device interface | XLR-3 |
| Connectivity technology | Wired |
| Cable length | 7.6 m |
| Product color | Blue |
| Power consumption | 5.4 mA |
| Impedance | 146 Ω |
| Depth (imperial) | 5.48 \ |
| Width (imperial) | 3.74 \ |
| Height (imperial) | 0.8 \ |
| Power requirements | 11-52V |
| Number of products included | 1 pc(s) |
| Signal-to-Noise Ratio (SNR) | 64.5 dB |
Weight and Dimensions| Depth | 139.1 mm |
|---|---|
| Width | 95.11 mm |
| Height | 20.3 mm |
| Microphone weight | 470 g |
| Microphone dimensions (D x H) | 139.1 x 20.3 mm |
Boundary microphones pick up sound in a cardioid pattern above the surface.
Rules for aiming, spacing, and handling the microphone for optimal performance.
Instructions for long-term installation using mounting holes on the bottom of the microphone.
Two-position switch filters low-mid frequencies for enhanced attack and clarity.
Includes a zippered carrying bag.
Lists an optional 7.6 m (25 ft.) cable.
Available replacement part is a cardioid cartridge.
To Next Page
