Need help?Do you have a question about the Shure Legendary Performance MX412 and is the answer not in the manual?
General| Polar Pattern | Cardioid |
|---|---|
| Output Impedance | 180 ohms |
| Connector | XLR |
| Type | Condenser |
| Frequency Response | 50 Hz to 17 kHz |
| Length | 12 inches |
| Phantom Power | 11 to 52 V DC |
| Self Noise | N/A (Dynamic microphone) |
Protects against plosives and provides 30 dB of "pop" protection.
Information on reducing preamplifier gain by 12 dB for signal optimization.
Guidance on aiming, distance, and using windscreens for optimal sound capture.
Procedures for mounting the microphone using flange or shock mount.
Detailed electrical, performance, environmental, and power characteristics.
Compliance with European Directives and CE marking eligibility.
To Next Page
