Shure RMCE-BT2 Faq

4. What is the difference between the RMCE-BT1 and the RMCE-BT2?
Both the RMCE-BT1 and RMCE-BT2 will enable wireless Bluetooth
connectivity for Shure detachable Earphones. The new RMCE-BT2 is
improved upon in several ways. It is compatible with more codecs, has
Bluetooth 5 vs Bluetooth 4.1, and has a dedicated, premium headphone
amplifier. Lower latency is possible on the RMCE-BT2 when paired with a
device that is compatible with AptX™ Low latency. Enhanced audio
quality is possible in the RMCE-BT2 vs the RMCE-BT1 because of the
codec support and the inclusion of a dedicated, premium headphone
amplifier. Additionally, battery run time of the RMCE-BT2 is up to 10
hours, while the RMCE-BT1 run time is up to 8 hours. The range for both
is the same (up to 10 meters).
5. How do I pair my RMCE-BT2 + Shure Wireless Sound Isolating™
Earphones with my device?
With the BT2 product OFF, activate pairing mode by holding center button
on the remote for 7 seconds. Navigate to Bluetooth settings in the source
device settings, and the device SHURE BT2 should appear in available
devices. Select, and your device should be paired. When successfully
paired, the LED on the back of the remote + mic piece will turn blue.

Shure RMCE-BT2 Specifications

General

Product color	Black
Bluetooth version	5.0
Bluetooth profiles	APT-X
Wireless technology	Bluetooth
Transmission distance	10 m
Number of simultaneously connected devices (max)	1
Quantity per pack	1 pc(s)
Standby time	350 h
Operating time	10 h