Need help?Do you have a question about the Shure E2 and is the answer not in the manual?
General| Type | In-Ear |
|---|---|
| Sensitivity | 105 dB SPL/mW |
| Driver | Dynamic |
| Impedance | 16 Ω |
| Connector | 3.5 mm |
Warns about permanent hearing damage from excessive volume levels. Use lowest volume possible.
Provides guidelines for safe listening and ear care, including audiologist check-ups and hygiene.
Describes proper insertion of earphones, Shure logo orientation, and cable exit.
Details the included flex and foam sleeves for earphone fit and isolation.
Explains how to use the adjustment tube for securing earphone cables.
Describes the 3.5 mm stereo plug for connecting to listening devices.
Identifies the sound delivery part and stresses the importance of keeping it clean.
Mentions wax guards for E2 models to prevent earwax entry into the nozzle.
Guides on differentiating left and right earphones based on color or markings for E2, E3, and E5 models.
Describes pulling the ear upward and outward to straighten the ear canal for insertion.
Explains fitting flex and foam sleeves for comfort, isolation, and a secure seal.
Instructs on routing earphone cords over the top and down the back of the ear for E2/E3 and E5.
Outlines steps to connect earphones to a listening device, including volume adjustment and insertion.
Crucial warning to always turn down volume before plugging in earphones to prevent sound source damage.
Mentions fit kits with various sleeve options, cleaning tools, and wax guards for different models.
Details disposable foam sleeves that compress and expand for a tight seal.
Describes reusable flex sleeves made of plastic or silicone for comfort and ease of insertion.
Explains optional triple-flange sleeves for a tighter seal and secure fit.
Provides instructions for sliding sleeves off and on, emphasizing proper nozzle coverage.
Advises avoiding moisture, impacts, and proper storage in a pouch.
Recommends cleaning E3/E5 nozzles with a wax removal tool after each use.
Instructs to check and replace wax guards for E2 earphones if clogged.
Guides on cleaning foam sleeves (disposable) and flex/triple-flange sleeves (antiseptic/soapy water).
Provides step-by-step instructions for applying wax guards to the E2 earphone nozzles.
Stresses that wax guards must be placed on the earphone nozzle, not the sleeve, for proper function.
Presents detailed technical specifications for E2, E3, and E5 models, including transducer type, sensitivity, impedance, and cable length.
Lists optional accessories for E3/E5 models, including various sleeve packs and triple-flange sleeves.
Lists optional accessories for E2 models, including foam and flex sleeves, and replacement wax guards.
Explains how custom-fit ear molds can improve comfort and ambient noise isolation for E3 earphones.
Provides contact details for Sensaphonics Hearing Conservation for custom ear mold inquiries.
To Next Page
