Shure BT2 User Manual

1/7
BT2 -- Shure Bluetooth® Earphones
Bluetooth Pairing
1. Turn off the earphones. Press and hold the center button on the earphone remote until the LED flashes blue
and red.
2. From your audio source, select "Shure BT2."
3. When successfully paired, the LED turns blue.
Note: If the pairing fails on the first attempt, repeat the process from the beginning.
For additional pairing methods, please visit http://www.shure.com/earphones (http://www.shure.com/earphones).
The best sound starts with a good fit
• Select the sleeve that provides a snug fit (like earplugs).
• Secure the cable behind the ear to maintain a tight seal.
To keep them sounding their best...
• Clean regularly to remove debris and deposits.

Shure BT2 Specifications

General

Bluetooth Version	5.0
Connectors	USB-C
Wireless Range	10 m
Charging Time	2 hours
Supported Codecs	AAC, SBC

Summary

Bluetooth Pairing

Pairing Process

Steps to pair Shure BT2 earphones with an audio source via Bluetooth.

Using the Remote

The Center Button Functions

Details on functions controlled by the center button: power, pairing, playback, calls, and reset.

Volume and Track Control

Functions of up and down buttons for volume, track skipping, and battery status.

Charging the Earphones

Charging Procedure

Steps for connecting earphones to a charger and understanding LED indicators during charging.

Specifications

Bluetooth 5 Details

Supported Codecs

Additional Codecs

Safety Information

General Warnings

Important warnings regarding battery handling, heat exposure, and unauthorized alterations.

Driving and Magnetic Material Precautions

Precautions for safe headphone use while driving and consultation for medical device compatibility.

Hearing Protection

Advice on preventing hearing damage by avoiding prolonged high-volume listening.

Information to the User

FCC Compliance and Interference

IC and Regulatory Compliance