Need help?Do you have a question about the Shure Sound Isolating Series and is the answer not in the manual?
General advice for using, cleaning, and maintaining earphones as per manufacturer's instructions.
Details severe injury or death risks from incorrect operation. Covers water, modification, dangerous usage, and choking hazards.
Details moderate injury or property damage risks from incorrect operation. Covers disassembly, force, dryness, and medical treatment.
Key instructions for safe product operation, including electrical, environmental, and handling precautions.
Specific warnings for Bluetooth products regarding battery safety, heat exposure, and unauthorized modifications.
Cautions for Bluetooth products, such as magnetic material interaction with medical devices and battery handling.
Details FCC rules compliance and user actions for interference mitigation.
Explains compliance with Innovation, Science and Economic Development Canada's license-exempt RSS.
Guidance on proper disposal of old electrical appliances to promote recycling and reduce toxic substances.
Instructions on how to detach and reattach the earphone cable, including precautions to prevent damage.
Guidance on selecting the best earphone sleeve for fit and sound isolation from available types.
Instructions on proper earphone insertion technique to ensure a tight seal for optimal sound.
Describes a method for wearing earphones by routing the cable over the ear for better stability.
Step-by-step guide on twisting to remove and sliding on new sleeves, ensuring a secure fit.
Instructions on how to properly grasp and twist earphones to remove them from the ear canal.
Advice on keeping earphones and sleeves clean, dry, and in good condition for optimal performance.
Procedure for cleaning the earphone nozzle to restore sound quality if it becomes blocked.
Step-by-step instructions for pairing Bluetooth earphones with audio devices.
Guide on how to connect the earphones to more than one Bluetooth device simultaneously.
Instructions for pairing Bluetooth earphones with a personal computer, including driver updates.
Steps for connecting earphones to a charger and indicators for charging status.
Answers common questions about using remote, microphone, and voice commands with BT1 earphones.
Explains how to set up and manage multi-point pairing and switch between active devices.
Information on which devices and operating systems are compatible with the earphones.
Instructions on activating and using voice assistants like Siri and Google.
Details on how to use the center, volume up, and volume down buttons for media playback and calls.
Discusses compatibility of earphones with fitness apps and notes limitations regarding biometrics.
Information on IPX rating, durability, and suitability for exercise and workouts.
Details on battery life, charging methods, indicators, and quick charge capabilities.
Clarifies whether the earphones can be used while they are being charged.
Compares wireless and wired SE earphones, highlighting benefits for exercise and convenience.
Information on Bluetooth use on airlines and compatibility with various devices like iPhone 7.
Lists which SE earphone models are compatible with the RMCE-BT1 and RMCE-BT2 accessories.
Details the Bluetooth codecs supported by the BT1 cable and earphones.
Explains pairing, multi-point pairing, and device controls for BT2 earphones.
Instructions on activating and using voice assistants and commands with BT2 earphones.
Details on using the center, volume up, and volume down buttons for media playback and calls with BT2.
Discusses compatibility of earphones with fitness apps and notes limitations regarding biometrics for BT2.
Information on IPX rating, durability, and suitability for exercise and workouts for BT2.
Details on battery life, charging methods, indicators, and quick charge capabilities for BT2.
Clarifies whether the BT2 earphones can be used while they are being charged.
Lists compatible accessory cables for mobile devices, compatible with all Shure earphones.
Details the Bluetooth codecs supported by the BT2 cable and earphones.
Explains factors affecting wireless performance and troubleshooting tips for BT2.
Lists available accessory cables for mobile devices, compatible with all Shure earphones.
Information on custom-fit earphone sleeves offered through a partnership with Sensaphonics.
Details the types of transducer drivers used in various Shure SE earphone models.
Provides sensitivity measurements for different Shure earphone models at 1 kHz.
Lists the impedance values for various Shure earphone models at 1 kHz.
Specifies the frequency response range for different Shure earphone models.
Describes the type of input connector used for the earphones and any included adapters.
Lists the net weight of various Shure earphone models.
Specifies the recommended operating temperature range for specific Shure earphone models.
Details the type of integrated microphone and polar pattern for RMCE-BT1 and RMCE-BT2.
Provides sensitivity data and lists compatible earphones for RMCE-BT1 and RMCE-BT2.
Lists compatible Bluetooth sources for the accessories.
Specifies the antenna type used for the Bluetooth accessories.
Details the antenna gain for the Bluetooth accessories.
Indicates the Bluetooth version supported by the accessories.
Specifies the operating frequency and modulation type for Bluetooth accessories.
Lists the RF output power and supported Bluetooth codecs.
Provides the wireless range and cable length specifications for the Bluetooth accessories.
Details the battery type and nominal voltage for Bluetooth accessories.
Specifies the battery life and total battery capacity (mAh) for Bluetooth accessories.
Information on USB charging requirements, charging time, and quick charge capabilities.
Indicates the acceptable temperature range for charging the earphones.
Specifies the output noise level for headphone amplifiers.
Lists the typical Total Harmonic Distortion plus Noise (THD+N) for audio components.
Specifies the frequency response for audio components.
Lists the output impedance values for audio components.
Points to online resources for regulatory and compliance info, and lists CE, IC, and FCC compliances.
Information about Qualcomm aptX, aptX HD, and aptX Low Latency trademarks.
Details the two-year warranty for defects, excluding batteries (one year), and conditions for claims.
Outlines what the warranty does not cover, such as misuse, unauthorized repair, or acts of God.
Addresses implied warranties, liability for incidental damages, and state-specific consumer rights.
Specific two-year warranty terms for purchases in Australia, including battery warranty and claim procedures.
Explains specific legal rights for Australian consumers under the Australian Consumer Law.
Guide on how to determine if product service or repair is needed and initiate the process.
Contact details and address for Shure's service department in North and South America.
Contact details and address for Shure Europe GmbH service operations.
Contact information for various Shure service centers within Indonesia.
To Next Page
General