Shure Sound Isolating SE310 User Manual

SE310
Sound Isolating™ Earphones
Featuring sound isolating
design and Tuned BassPort
enhanced Hi-Definition
MicroSpeakers, the Shure
SE310 delivers extended
range audio and enhanced
bass. An ideal personal
listening device upgrade, the
stylish Shure SE310 includes
a carrying case, modular
cable, interchangeable
Sound Isolating™ sleeves
and adapters—providing
a comfortable,
personalized fit and
maximum portability
©2006, Shure Incorporated
27EN3244 (Rev. 2)
Printed in U
.S.A.
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.
To replace sleeve, carefully remove old one and slide new sleeve over nozzle barb. If any
part of the nozzle is exposed, sleeve is not properly installed. Replace sleeves if they do
not grip the nozzle tightly
WEARING THE EARPHONES
Three suggested methods for wearing the earphones are illustrated below.
Tighten the cable and take up slack by raising the cable sleeve.
Over the ear
in back
Over the ear
in front
Straight down
in front
Cable
Sleeve
Nozzle Barb
CHOOSING AN EARPHONE SLEEVE
Your earphones come with a selection of sleeves. Make sure the sleeve you
choose is easy to insert into your ear, fits comfortably, and is easy to remove
from your ear.
Soft Foam Sleeves
When using the foam sleeves, compress the sleeve between your
fingers before inserting it into the ear canal. Hold the earphone in
place for about ten seconds while the foam expands and creates
a tight seal.
Triple-Flange Sleeves
If desired, the sleeve stem may be shortened. Use sharp scissors
to carefully trim the stem to the desired length.
Soft Flex Sleeves
In small, medium, and large sizes.
Made from pliable rubber.
Note: carefully slide sleeve over earphone nozzle barb for a secure grip.
REMOVING THE EARPHONES
Grasp the body of the earphone and gently twist to remove.
CLEANING THE EARPHONE NOZZLE
If you notice a change in sound quality, remove the sleeve and check
the nozzle of your earphone. If nozzle is blocked, clear obstruction
by using wire loop end of cleaning tool.
Nozzle
Wire Loop
When cleaning, do not force any object through the earphone nozzle!
This will damage the earphone sound filter.
Note: Do not pull on cable to remove the earphone.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Sleeve
Sleeve Over Barb
Cleaning
Tool

Shure Sound Isolating SE310 Specifications

General

Brand	Shure
Model	Sound Isolating SE310
Category	Headphone
Language	English

Summary

Wearing the Earphones

Earphone Wearing Methods

Three suggested methods for wearing the earphones are illustrated: over the ear in back, over the ear in front, and straight down in front.

Inserting and Replacing Earphone Sleeves

Proper Insertion and Sleeve Replacement

Instructions for inserting earphones and replacing sleeves, ensuring a tight seal for optimal sound quality.

Removing the Earphones

Safe Removal Technique

Guidance on how to safely remove earphones by grasping the body and twisting, avoiding pulling the cable.

Choosing and Using Earphone Sleeves

Sleeve Selection Guide

Details on Soft Flex, Soft Foam, and Triple-Flange sleeves, emphasizing comfort and fit for optimal sound isolation.

Cleaning the Earphone Nozzle

Nozzle Cleaning Procedure

Steps to clear blockages from the earphone nozzle using the provided cleaning tool to restore sound quality.

Furnished and Additional Accessories

Included Accessories

Lists the Deluxe Carrying Case, Fit Kit with various sleeves and cleaning tool, and Stereo Extension Cable.

Accessory Options

Information on availability of replacement sleeves, carrying cases, adapters, extension cables, and control accessories.

Technical Specifications

Key Performance Metrics

Details transducer type, sensitivity, impedance, frequency range, DC resistance, input connector, net weight, and temperature ranges.

Maintenance and Care

Earphone Care Guidelines

Instructions for keeping earphones and sleeves clean, dry, and in good condition for optimal performance and safety.

Certification and Compliance

Regulatory Compliance

Indicates eligibility for CE marking and conformance with European EMC Directive and EN 55103 standards.

Custom Earphone Sleeves

Custom Fit Sleeves Information

Suggests custom-fit molded sleeves for extended use and provides contact information for Sensaphonics.