Shure Incorporated
25/26
4.
5.
6.
◦
◦
◦
7.
When an update is available, a green dot will appear next to Firmware Update in the device settings menu.
Tap the caret icon and follow the onscreen step-by-step instructions. The progress bar displays progress percentage for
both adapters; it is a single process.
After a successful update, the “Update Completed” confirmation screen appears.
Do not power off the AONIC product until the update completes.
Do not put the adapters back into the case during firmware update. It will cancel the update.
Note: If the update fails on the first attempt, be sure to quit the app completely before attempting again. You may
need to force quit the app to confirm that it isn’t running in the background. Wait 5 minutes before opening the app
and attempting again. Check the list below for tips on a successful update.
Confirm the new firmware version as displayed in the About menu (Device screen > … > About > Firmware Version).
To Next Page
Loading...
