Shure Incorporated
6/8
* If an error occurs when a transmitter is docked in the charger, remove the battery from the transmitter and place directly into the charger. If the error persists,
contact Shure Technical Support.
Note: Store batteries in the charger or in a proper container. To protect terminals from shorting, DO NOT place batteries in a box or pocket with metal objects
such as nails, screws, or keys.
Specifications
SBC203
Charge Current
625 mA or 250 mA
Lower current used when using another power source, or operating between 0℃ and 10℃
Charge Time
50% = 1 hour : 15 minutes; 100% = 2 hours : 30 minutes
To Next Page
Loading...
