What to do if my Shure SBRC displays 'Check Battery'?
If your Shure Battery Charger displays 'Check Battery', ensure the battery is fully inserted in the charger module and that the module door is latched. Also, check the battery contacts and charger module contacts to ensure they are clean. If the condition persists, replace the battery.
How to fix a Shure Battery Charger that won't charge my battery?
If your Shure Battery Charger has stopped charging, it may be due to the battery temperature. Charging will resume once the battery temperature rises above 0° C or cools below 60° C. Avoid direct sunlight and other heat sources.
What to do if my Shure Battery Charger is not charging battery within specified time frame?
If the battery is unable to charge within the specified time frame using the Shure Battery Charger, check the battery and contacts. If the condition persists, replace the battery.
What to do if my Shure SBRC says 'Over Temp! Check Fan/Vents'?
If your Shure Battery Charger displays 'Over Temp! Check Fan/Vents', remove any obstructions or debris from the fan vents. Also, ensure sufficient airflow to the charger.
What to do if my Shure SBRC displays 'Check Charger'?
If the Shure Battery Charger displays 'Check Charger', check the battery contacts and charger module contacts to make sure they are clean and fully engaged. If the condition persists, try substituting a functional battery or charger module.
What to do if my Shure SBRC Battery Charger displays 'Read Error'?
If your Shure Battery Charger displays 'Read Error', the battery contacts may be dirty or damaged, preventing battery detection by the charger. Check that the battery contacts are clean and undamaged. If the condition persists, replace the battery.
What to do if my Shure SBRC says 'Unknown Module'?
If your Shure Battery Charger displays 'Unknown Module', update the battery charger firmware.
What to do if my Shure SBRC says 'Unknown Battery'?
If your Shure Battery Charger displays 'Unknown Battery', update the battery charger firmware.
What to do if my Shure SBRC Battery Charger stops charging at 80 percent?
If your Shure Battery Charger stops charging at 80 percent of full capacity, allow the battery to cool below 45° C to resume charging to full capacity.
General| Brand | Shure |
|---|---|
| Model | SBRC |
| Category | Battery Charger |
| Language | English |
Critical safety warnings regarding battery handling, explosion risks, and proper disposal.
Highlights of the SBRC charger, including modularity, charging speed, and networkability.
Lists the Shure lithium-ion rechargeable battery models compatible with the SBRC.
Details the LED colors, charging modes, and battery status indications.
Displays battery temperature in Celsius/Fahrenheit and its status (Normal, Cold, Warm, Hot).
Settings for IP address, subnet mask, and gateway for network connectivity.
Controls cooling fan speed and operating modes for optimal performance.
Configures the charger for long-term battery storage at 3.8 volts.
Procedure for charging batteries discharged below 3.0 volts.
Lists common warnings and error messages with their corresponding troubleshooting solutions.
Enables charging with display backlight and network functionality disabled.
To Next Page
