Shure SBRC - Fan Settings; Storage Mode Configuration

Shure Incorporated
11/16
6.
1.
2.
3.
4.
5.
6.
•
•
•
1.
2.
3.
4.
•
•
•
When finished, use the arrow buttons to move the ► to select OK to save or Cancel to discard, and then press the SET
button.
Subnet
Displays the current subnet setting. Press SET button to edit in IP menu.
Setting the Subnet
Navigate to the IP mode menu and press the SET button.
Use the arrow button to highlight Manual.
Press the SET button to enable editing of the subnet.
Use the arrow buttons to move the ► to select Sub:.
Use the arrow buttons to edit the IP numbers and use the SET button to advance to the next number.
When finished, use the arrow buttons to move the ► to select OK to save or Cancel to discard, and then press the SET
button.
MAC (MAC Address)
Displays the MAC address, which is an embedded, uneditable identification number unique to each device. The MAC address
is used by the network and Wireless Workbench software to identify components.
Brightness
Sets the brightness of the display to low, medium, or high.
Display Invert
This changes the display colors from white text on dark background to dark text on a light background.
Setting the Fan Speed
The cooling fan has the following speed options:
Low Speed = fan is always on, at a lower speed for quiet operation
High Speed = fan is always on, at a higher speed for maximum cooling
Automatic = fan will operate only when the internal temperature becomes too warm
Note: Speed may switch from Low to High if additional cooling is needed to protect the component.
Simultaneously press and hold the ▲ and ▼ buttons to access the utility menu.
Use the arrow buttons to scroll to the Fan setting.
Press Set to enable editing, and then use the arrow buttons to select a speed option.
Press Set to save, and then simultaneously press and hold the ▲ and ▼ buttons to return to the main menu.
Fan (Cooling Fan Mode)
The cooling fan has the following operating modes:
Automatic: The fan is enabled and adjusts speed based on the internal temperature of the unit
Always on: The fan runs continuously to provide maximum cooling in warm environments
Storage Mode
OFF: Batteries will be charged to capacity