Shure SM35 Quick Start Guide

SM35Performance Headset Condenser Microphone
SM35 Headworn Microphone
The Shure SM35 is a headworn electret condenser microphone, intended for use with a
wireless bodypack transmitter in live stage performances.
Wearing the Microphone
1. Install the windscreen on the microphone boom.
2. Place the headband around the back of the head, with the boom on the left side.
3. Place the microphone at the corner of the mouth. To decrease pops and plosives, avoid
placing the microphone directly in front of the mouth

Shure SM35 Specifications

Audio Specifications

frequency response	40 Hz to 20, 000 Hz
polar pattern	Unidirectional (Cardioid)
audio output level	-59.0 dBV/Pa

Electrical Specifications

output impedance	2400 Ω
signal-to-noise ratio	55 dB
equivalent output noise	39 dB

Power Requirements

connector type	TA4F or XLR
power requirements	+5 V DC 12 to 52 V DC, 10 V maximum (DC bias)
dynamic range	114.0 dB

Physical Specifications

net weight	72 g (2.53 oz.)
cable length	1.1 m (45 in.)
maximum SPL	153.0 dB