Need help?Do you have a question about the Shure SM7dB and is the answer not in the manual?
General| Type | Dynamic |
|---|---|
| Frequency Response | 50 Hz to 20 kHz |
| Output Impedance | 150 ohms |
| Connector | XLR |
| Switchable EQ | Yes |
| Built-in Preamp | Yes |
| Polar Pattern | Cardioid |
| Built-in Preamp Gain | 28 dB |
| Weight | 765 grams |
| Sensitivity | -59 dBV/Pa (1.12 mV) at 1 kHz |
General warnings about severe injury or death from incorrect operation, water ingress, or modification.
Details the SM7dB dynamic microphone's smooth, flat, wide-range frequency response and built-in preamp.
Explains the requirement for +48 V phantom power and connection methods to computers and mixers.
Guidance on adjusting gain levels for optimal signal-to-noise ratio in various applications.
Advice on selecting external preamp impedance settings and when to bypass the built-in preamp.
Recommendations for optimal microphone positioning for sound quality and bass response.
Instructions on using standard and A7WS windscreens to manage plosives and wind noise.
Overview of the back panel switches for bass rolloff, presence boost, and preamp gain adjustment.
Detailed explanation of the Bass Rolloff, Presence Boost, Bypass, and Preamp gain adjustment switches.
Diagrams illustrating right side and rear views for microphone orientation.
Instructions for configuring the mounting assembly for boom arm or microphone stand use.
Procedure for attaching or detaching the brass stand adapter for mounting.
Key technical details including type, frequency response, polar pattern, impedance, and load.
Data on microphone sensitivity across different preamp settings and hum pickup levels.
Information on polarity convention and the required phantom power specifications.
Details on microphone weight and housing materials.
Graphs illustrating the frequency response with different switch settings (Flat, Bass Rolloff, Presence Boost).
Diagrams showing the microphone's directional pickup patterns at various frequencies.
List of included accessories and available replacement parts for the SM7dB.
Technical drawings showing the external dimensions of the microphone in inches and millimeters.
Information regarding CE marking and compliance with European Union requirements.
Declaration of conformity with UKCA requirements for products sold in the United Kingdom.
Guidance on the proper disposal of electrical and electronic equipment in the EU and UK.
Information on chemical substances regulation within the EU and UK.
To Next Page
