Shure SM63 - User Manual

MODELS SM63, SM63L, AND SM63LB
DYNAMIC MICROPHONES
Elegant, yet rugged, the high output SM63 series dynamic
omnidirectional microphones are designed for professional
applications where performance and appearance are critical.
Their smooth, wide frequency response is tailored for optimum
speech intelligibility, and includes a controlled low–frequency
rolloff for reduced pickup of stand and wind noise. A built-in
humbucking coil makes the microphones virtually immune to
strong hum fields, such as those produced by studio lighting.
The three models differ only in length and color. The cham-
pagne-finished SM63 is designed for hand-held use on stage
and in broadcast, recording, and television studios. The
champagne-finished SM63L and the black-finished SM63LB
are ideal for remote interviews, sports broadcasts, and other
situations where longer microphones are desirable.
All three models use a patented Shure shock mount sys-
tem to minimize handling noise. They also include a VERA-
FLEXt grille that protects against damage from a drop of up
to 2 meters (6 ft.), and is impervious to dents, rust, corrosion,
and moisture. An integral pop filter effectively reduces
breath noise. The SM63L and SM63LB include a two–stage
windscreen accessory designed for outdoor use. All models
are supplied with a stand adapter and zippered storage bag.
Cables are available separately.
Features
•
High output, low impedance
• 80 to 20,000 Hz frequency response tailored for optimum
speech intelligibility
• Low-frequency rolloff and built-in shock mount for reduced
pickup of handling noise and stand vibration
• Humbucking coil for virtual immunity to strong electromag-
netic hum fields
• Exceptionally rugged VERAFLEXt grille that resists
damage from drops, and is immune to rust, corrosion, and
moisture
• Built-in pop filter that suppresses breath and wind noise
• Accessory windscreen supplied with SM63L and SM63LB
for outdoor use under adverse wind conditions
• Excellent balance and feel for hand–held use
• Supplied snap-in stand adapter
• Sleek, handsome appearance looks good on stage, screen,
and television
SPECIFICATIONS
Type
Dynamic
Frequency Response
80 to 20,000 Hz (see Figure 1)
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
0
+10
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
Hz
20000
10000
1000
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
100
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
-10
50
20
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
ÁÁÁÁÁÁÁÁÁÁÁ
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
Á
dB
TYPICAL FREQUENCY RESPONSE
FIGURE 1
Polar Pattern
Omnidirectional
lmpedance (at 1,000 Hz)
Rated at 150 ohms (298 ohms actual)
Output Level (at 1,000 Hz)
–56.5 dBV/Pa (1.5 mV)
(1 Pa = 94 dB SPL)
Hum Pickup (typical at 60 Hz)
21 dB equivalent SPL in a 1 millioersted field
Model SM63 User Guide
27B3025 (Rev. 3)
2003, Shure Incorporated
Printed in U.S.A.

Summary

Microphone Features

Models and Description

Technical Specifications

Polarity and Construction Details

Shock Mount

Patented internal vibration isolator to minimize handling noise.

Stand Adapter

Snap-in adapter adjustable through 90 degrees for mounting on stands.

Microphone Case

Describes the champagne or black finish aluminum case with VERAFLEX grille.

Dimensions

Provides the length and diameter specifications for the microphones.

Weight Information

Net and packaged weight details for the SM63, SM63L, and SM63LB models.

Certifications

Details CE marking compliance and European standard conformance.

Architects Specifications

Accessories and Parts

Furnished Accessories

Lists items included with the microphone, such as swivel adapter and windscreen.

Optional Accessories

Lists accessories available for separate purchase, like desk stands and cables.

Replacement Parts

Provides part numbers for replacement cartridges, grilles, and plug elements.

Shure SM63 Specifications

General

Windscreen included	Yes
Number of products included	1 pc(s)
Type	Stage/performance microphone
Voice coil type	Dynamic
Sensitivity (1kHz)	1.5 mV/Pa
Microphone frequency	80 - 20000 Hz
Microphone sensitivity	-56.5 dB
Microphone direction type	Omnidirectional
Output impedance	150 Ω
XLR out	1
Device interface	XLR-3
Connectivity technology	Wired
Product color	Champagne
Housing material	Aluminum

Weight and Dimensions

Width	144.5 mm
Diameter	32 mm
Microphone weight	99 g