Shure SM7dB User Manual

Shure Incorporated
5/12
Velcro Cable Tie
Use the enclosed velcro tie to secure the cable.
Windscreen
Use the standard windscreen for general voice and instrumental applications.
When you speak, you may hear vocal pops from some consonant sounds (known as plosives). To prevent more plosive
sounds and wind noise, you can use the larger A7WS windscreen.
Adjust Back Panel Switches

Shure SM7dB Specifications

General

Type	Dynamic
Frequency Response	50 Hz to 20 kHz
Output Impedance	150 ohms
Connector	XLR
Switchable EQ	Yes
Built-in Preamp	Yes
Polar Pattern	Cardioid
Built-in Preamp Gain	28 dB
Weight	765 grams
Sensitivity	-59 dBV/Pa (1.12 mV) at 1 kHz