● Pull straight apart—not at an angle.
● Note: If you pull at an angle, the connector will not detach.
● Do not twist, cable is a snap fit, not threaded.
● Listen for a click when connecting.
● When reattaching the cable, match the "L" and "R" markings and the color
(Red = Right).
Specifications
Type
circumaural, closed-back
Transducer Type
Dynamic, Neodymium magnet
Driver Size
40 mm
Frequency Response
5 to 25,000 Hz
Sensitivity
@
1
kHz
99 dB/mW
Impedance