EasyManua.ls Logo

Shure SVX Wireless - Page 10

Shure SVX Wireless
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
SVX
Working Range
Note: Actual range depends on RF signal absorption, reflection
and interference.
HI power mode 75 m (250 ft) (Line of Sight)
LO power mode 18 m (60 ft) (Line of Sight)
Audio Frequency Response
50–15000 Hz (Note: Dependent on microphone type)
Modulation
FM, Ref. ±48 kHz deviation with 1 kHz tone
Total Harmonic Distortion
<0.5%
Dynamic Range
90 dB, A-weighted, typical
Operating Temperature Range
-10°C (0°F) to 50°C (122°F) (Note: Battery characteristics
may limit this range.)
Transmitter Audio Polarity
Positive pressure on microphone diaphragm produces positive
voltage on pin 2 (with respect to pin 3 of XLR output) and the tip
of the 6.35 mm (1/4-inch) output.
SVX1
Audio Input Level (maximum)
MIC setting −15 to − 7 dBV
LINE setting 1 to 9 dBV
Gain Adjustment Range
8 dB
Input Impedance
MIC setting 16 kΩ
LINE setting 120 kΩ
RF Output Power
10 mW (dependent on applicable country regulations)
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
90 g (without batteries)
Housing
Molded ABS
Power Requirements
2 "AA" size alkaline or rechargeable batteries
Battery Life
up to 10 hours
SVX2
Audio Input Level (maximum)
−20 dBV
Input Impedance
22 kΩ
RF Output Power
dependent on applicable country regulations
HI power mode 10 mW maximum
LO power mode 1 mW maximum
Dimensions
254 mm X 51 mm dia. (10 X 2 in.)
Weight
270 g (10.2 oz.) (without batteries)
Housing
Molded ABS
Power Requirements
2 "AA" size alkaline or rechargeable batteries
Battery Life
up to 10 hours (alkaline)
SVX4/ SVX88
Dimensions
SVX4 32 mm X 168 mm X 104.5 mm
SVX88 32 mm X 256 mm X 104.5 mm
Weight
SVX4 245 g (8.5 oz.)
SVX88 381 g (13.5 oz.)
Housing
Molded ABS
Audio Output Level
Ref. ±48 kHz deviation with 1 kHz tone
XLR connector into 100 kΩ load −16 dBV
6.35 mm (1/4") connector into 100 kΩ load −22 dBV
J9 Audio Output Level
Ref. ±26 kHz deviation with 1 kHz tone
XLR connector into 100 kΩ load −21 dBV
6.35 mm (1/4") connector into 100 kΩ load −27 dBV
Output Impedance
XLR connector 600 Ω
6.35 mm (1/4") connector 600 Ω
Sensitivity
-105 dBm for 12 dB SINAD, typical
Power Requirements
(supplied by external power supply)
SVX4: 12–18 V DC @ 130 mA
SVX88: 12–18 V DC @ 220 mA
Specifications

Related product manuals