To Next PageTo Next Page
Need help?Do you have a question about the Shure UA874 and is the answer not in the manual?
General| Type | Active Directional Antenna |
|---|---|
| Connector | BNC |
| Impedance | 50 ohms |
| Polarization | Linear |
| Power Requirements | 10 to 15 V DC |
| Frequency Range | 470–900 MHz |
Overview of the UA874's log periodic dipole array, amplifier, and mounting options.
Highlights key attributes like low-noise amplifier, compatibility, threaded adapter, and gain selector.
Instructions for connecting the antenna, power requirements, and directing it towards the coverage area.
Guidelines for maintaining antenna cables to ensure optimal performance and prevent damage.
Explains the gain switch, RF Overload LED, Gain Mode LED, and BNC connector.
Advice on positioning antennas for optimal signal, including line-of-sight and separation.
Guidance on using gain settings to compensate for cable loss, not for boosting performance.
A chart to help select the appropriate gain setting based on cable type and length.
Details on connector type, impedance, power, frequency range, reception pattern, and dimensions.
Information regarding European directives compliance and CE marking eligibility.
Lists available accessories for the UA874, such as a protective zipper pouch.
