Shure ULX Wireless System - Antennas and Accessories; Coaxial Antenna Cables; UA600 Front Mount Antenna Kit; UA820 1;2-Wave Antenna

3
ULXP4 DUAL
ULXP4
6 mm (1/4”)
1 x UA506
1 x UA600
2 x UA820
1 x UA440
1 x UA507
4 x UA820
1 x UA844
1 x UA507
4 x UA506
1 x UA844
2 x UA507
Rack Installation Rackmount Options
The following shows rackmounting options for one to four receivers and
lists the required accessories.
FRONT MOUNT ANTENNA KIT
UA600
COAXIAL CABLES
UA802
UA806
UA825
UA850
UA100
UA830
UA870
FOR LONG ANTENNA CABLE RUNS
UA870
UA844
DISTRIBUTION AMPLIFIER
ANTENNA RACK MOUNT KIT
UA440
Antenna Combiners and Accessories
The supplied antennas can be connected directly to the BNC-type ANTENNA connectors. However, optional antenna mounting accessories from Shure
can improve reception and reduce rack clutter. Use the following guidelines:
• Antennas and receivers must be from the same band.
• Mount antennas more than 40 cm (16 inches) apart.
• Use Shure UA825 or UA850 low-loss coaxial antenna cable (or any 50 ohm, low-loss cable such as RG-8U).
Visit www.shure.com for more information on wireless antenna accessories.
UA600
Coaxial Cables
Inline Antenna Amplier
for long antenna cable runs
Antenna Rack Mount Kit
Distribution Amplier
combines antennas and power supplies for
multiple receivers
Active Directional Antenna
for more focused reception
1/2-Wave Antenna
included with ULXP4
systems
Front Mount Antenna Kit
UA802
UA806
UA825
UA850
UA100
UA820
UA830
UA440
UA844
UA870