EasyManua.ls Logo

SHURflo 200 Series User Manual

SHURflo 200 Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Other manuals for SHURflo 200 Series

Question and Answer IconNeed help?

Do you have a question about the SHURflo 200 Series and is the answer not in the manual?

SHURflo 200 Series Specifications

General IconGeneral
BrandSHURflo
Model200 Series
CategoryWater Pump
LanguageEnglish

Summary

THE TRI-A-FRAM PUMP

INSTALLATION TECHNIQUE

INSTALL THE PUMP IN A READILY ACCESSIBLE LOCATION

Guide on selecting an optimal and accessible location for pump installation.

ELECTRICAL WIRING REQUIREMENTS

Details on wire gauge, fuse requirements, and circuit setup for the pump.

PLUMBING TUBING - HOSE AND PIPE

Instructions on hose selection, installation, and plumbing line diameter.

CHECK OUT PROCEDURE

PRELIMINARY CHECK

Pre-operation checks including clamps, kinks, and fuse condition.

INITIAL OPERATION

Step-by-step guide for filling the tank and purging air from the system.

CHECK FOR LEAKS

Method for detecting leaks using a pressure gauge to ensure system integrity.

TROUBLE SHOOTING

Comprehensive guide to diagnose and resolve common pump operational issues.

ABNORMAL CYCLING

Diagnosing pump cycling on/off when faucets are closed, indicating potential leaks.

IF PUMP DOES NOT SHUT OFF

Troubleshooting steps for when the pump fails to turn off after operation.

WINTERIZING YOUR WATER SYSTEM

WARRANTY AND WARRANTY PROCEDURE

Related product manuals