ENG 14
OPTION CONNECT WITH AP MODE
A. Click on “EZ Mode ” in the upper right corner
to switch to AP mode.
B. Press and hold the power button on the power
strip again for about 5 seconds until the blue light
on the button changes from flashing fast to flashing
slowly.
C. Once the light blinks slowly, confirm it in the
app and select “Next”.
D. Click on “Connect” to see your available WiFi
networks in your phone’s settings.
E. Select the network “SmartLife-XXXX” and then
go back to the Smart Life App.
F. Once connected, it will stop flashing. It may take
a while for it to appear in the App. When it finishes
loading, you can rename it and it will be ready to
use.
2.2. NEXT STEPS
OPTION CONNECT WITH EZ MODE
A. Confirm in the application that the light flashes
quickyly and click on “Next”.
B. Once connected, it will stop flashing. It may take
a while for it to appear in the App. When it finishes
loading, you can rename it and it will be ready to
use.
To Next Page
Loading...