Wash Cycle Table
The table below shows which programs are best for the levels of food residue
on them and how much detergent is needed. It also show various information about
the programs. Consumption values and programme duration are only indicative except
for ECO programme.
( )indicates that the programme uses rinse aid in the last rinse.
Program
Running
Time(min)
Energy
(kWh)
Water
(L)
Description
Of Cycle
Rinse
Aid
Pre-wash
wash(50℃)
Rinse
Rinse(65℃)
Drying
120
1.100
14.2
Pre-wash(50℃)
Wash(65℃)
Rinse
Rinse
Rinse(65℃)
Drying
Pre-wash(45℃)
Wash(55℃)
Rinse
Rinse(65℃)
Drying
Pre-wash
Wash(45 ℃)
Rinse(65℃)
Drying
Wash (55℃)
Rinse (55℃)
Rinse (55℃)
175
230
205
30
1.302
0.923
1.621
0.751
17.8
14.2
11
11.2
Wash(60℃)
Rinse
Rinse(65℃)
Drying
90 11.51.350
20g
Universal
Glass
90 min
Intensive
4/16g
4/16g
4/16g
4/16g
20g
(*EN
6 0436)
Rapid
13
1 or 2 tabs
1 tab
1 or 2 tabs
Detergent
Pre/Main wash
1 tab
1 or 2 tabs
En60436: The ECO program is suitable to clean normally soiled tableware, that for
this use, it is the most efficient program in terms of its combined energy and water
consumption, and it is used to assess compliance with the EU ecodesign legislation.
NOTE:
To Next Page
Loading...