Fiber gasket
INSTALLING THE FLOAT VALVE
ROBECO 06 and STANDARD 15EL
MAINTENANCE (95L & 99B)
4, quai Antoine 1
er
- BP 219 - MC 98007 MONACO Cedex
Tél. 00 377 93 15 53 75 - Fax : 00 377 92 05 71 04 - E-mail: contact@siamp.com
➊
Position valve
➋
Fasten with nut
➌
Connect to water supply
➍
Adjust water level with the adjustment screw
➊
Position valve
➋
Fasten with nut
➌
Connect to water supply
➍
Adjust water level with the adjustment screw
(15 EL) or by bending the rod (06)
COMPACT 99B and HANDY 93B
COMPACT 95L
Adjustment screw
Insert rod
as far as
possible
Locking nut
Fiber gasket
Adjustment screw
Locking nut
Fiber gasket
Adjustment
screw
Locking nut
Locking nut
Gasket/filter
Adjustment screw
Filter
Membrane
Membrane
Manually screw the backnut until it is in contact with the
ceramic. If necessary give an extra quarter turn (maximum).
N.B.: Excessive tightening can damage the mechanism and
would not be covered by the guarantee.
Ensure tightness of connection to cistern with filter gasket.
WARNINGS:
1 - Do not overtight in any case.
2 - Do not use any sealing paste and/or compound in any
case
3 - Do not use connector handling the internal part of the
inlet valve.
SIAMP will be not responsible in case these warnings
are not respected.
Siamp UK Ltd - Unit C2 - Meadowbank Business Park - Tweedale Way
Hollinwood - Oldham - Greater Manchester - OL9 8EH
Telephone : 0161 681 2120 - Fax : 0161 681 2130 - aftersales@siamp.co.uk
To Previous Page
Loading...
