-5-
perform a blood glucose test.
The GS1 CGM System has not been tested in populations using anti-coagulant therapy,
and individuals on these therapies may have sensor glucose readings that are inaccurate.
Follow your professional healthcare team’s advice on the use of anticoagulants when you
are wearing the Sensor.
Physiological differences between the interstitial fluid and capillary blood may result in
differences in glucose readings between the System and results from a fingerstick test using
a blood glucose meter. Differences in glucose readings between interstitial fluid and
capillary blood may also be observed during times of rapid change in blood glucose, such
as after eating, dosing insulin, or exercising.
Severe dehydration (excessive water loss) may cause false low sensor results. In the
presence of symptoms that may lead to suspicion of dehydration, immediately consult a
professional healthcare team.
Physical displacement：
⚫ During the course of wearing the device, the Sensor can come loose or the Sensor tip can
come out of the skin. This may occur, for example, during intense exercise, or if the Sensor
is bumped.
⚫ In such cases, the displacement may cause the readings to be unreliable or fail to transmit.
If you are experience data readings that do not match how you feel, check to make sure
the Sensor has not come loose. If it has come loose, remove it, apply a new one. Do not
attempt to reinsert the Sensor. If the problem continues contact your professional
healthcare team.
⚫ Report these cases by contacting Customer Service at support@sibionics.com.
What to know about Glucose Alarms:
⚫ To prevent missed alarms, make sure your phone has sufficient battery power and that
sound and/or vibration are turned on.
⚫ In the event that an App or OS update causes your previously compatible phone to become
To Next Page
Loading...