How to troubleshoot Err 11 on Sicam SBM 155?
If your Sicam Wheel Balancer displays Err 11, it indicates a defective passage through zero sensor in optoelectronics or that the motor will not turn. Check the optoelectronic card connection and also check the electrical part.
What to do if my Sicam SBM 155 Wheel Balancers displays Err 4?
If your Sicam Wheel Balancer displays Err 4, it means the motor cannot reach the necessary revolutions for effective balancing. First, check the mains voltage, as it might be low. If the voltage is adequate, the electronic card or electrical plant may be malfunctioning and need replacement.
Why does my Sicam SBM 155 Wheel Balancers show Err 6?
If your Sicam Wheel Balancer shows Err 6, it could be due to the guard not being lowered or a broken guard microswitch. Ensure the guard is lowered with the wheel mounted. If the guard is down, the microswitch might be broken and needs replacement.
What does Err 5 mean on Sicam SBM 155 and how to fix it?
If your Sicam Wheel Balancer displays Err 5, it indicates that the calibration weight was not applied during the calibration process or the pick-ups are not connected. Repeat the calibration from the beginning, ensuring you apply the calibration weight when instructed. Also, check the pick-up connections to ensure they are properly connected.
What causes Err 20 on Sicam SBM 155?
If your Sicam Wheel Balancer displays Err 20, it could be due to the brake pedal being operated during measurement or irregular motor rotation speed. Avoid pressing the brake pedal while the motor is running. Also, avoid knocking the machine during the measuring cycle and check the mains voltage, as it might be low.
How to troubleshoot Err 3 on Sicam Wheel Balancers?
If your Sicam Wheel Balancer displays Err 3, it could be because the wheel was rotating backwards on start-up or the motor winding is inverted. Ensure the wheel is still before starting and avoid rotating it backwards. Also, check the motor connection to ensure it is correct.
Why does my Sicam SBM 155 Wheel Balancers show Err 18?
If your Sicam Wheel Balancer displays Err 18, it means wheel data not set. Set the wheel data before starting the measuring cycle.
What does Err 22 mean on Sicam SBM 155?
If your Sicam Wheel Balancer displays Err 22, it indicates some fault in the optoelectronic signals. Check that the optoelectronic card is protected from daylight and cover it if necessary. If the defect persists, check and replace the optoelectronic card and the control panel electronic card, if necessary.
What does Err 9 mean on Sicam SBM 155 Wheel Balancers and how to fix?
If your Sicam Wheel Balancer displays Err 9, it indicates that the right pick-up is not correctly connected, is defective, or the cable is disconnected. Check the right pick-up connection and replace it if necessary.
How to resolve Err 17 on Sicam SBM 155 Wheel Balancers?
If your Sicam Wheel Balancer displays Err 17, it means the weight needed for balancing the wheel is out of the regulation field (above 500 grams). Check that the wheel is correctly fixed on the flange. Then, find the external position, apply a 100-gram weight, and launch a run.
Detailed specifications of the wheel balancer, including dimensions, weight, and electrical data.
Identification of the main components of the wheel balancer shown in the illustration.
Details on dimensions, weight, electrical supply, and range of applications for the SBM 155.
List of accessories provided with the machine and those available upon request.
Instructions for unpacking, placement, safe distances, and fixing requirements.
Instructions for electrical hook-up, safety precautions, and manufacturer liability.
Steps for attaching various adapters and securing automobile and motorcycle wheels.
Explanation of the control panel layout, buttons, indicators, and their functions.
Step-by-step guide to performing wheel balancing, including program selection and data entry.
Procedures for programming adhesive weights, weight separation, and imbalance optimization.
Instructions for machine calibration, balancing checks, and auto-diagnosis functions.
Guide to using ALUDATA programs for balancing and setting wheel data.
Instructions for regular cleaning, user maintenance, machine handling, and storage.
Procedures for proper disposal of WEEE and environmental protection guidelines.
Information on obtaining technical support, ordering spare parts, and safety warnings.
Official document declaring the product's compliance with relevant European directives and harmonized standards.
General| Brand | Sicam |
|---|---|
| Model | SBM 155 |
| Category | Wheel Balancers |
| Language | English |
To Next Page
