To Next PageTo Next PageWhat does Err 21 mean on Sicam SBM 155 Wheel Balancers?
If your Sicam Wheel Balancer displays Err 21, the electronic card has detected a dangerous condition related to a high wheel speed during an inactive phase. Switch off the machine, lower the guard, and switch it back on without moving the wheel. If the error persists, check and replace the electric or electronic part, such as the control panel or encoder card, if necessary.
What to do if Sicam Wheel Balancers displays Err 10?
If your Sicam Wheel Balancer displays Err 10, it indicates that the position sensors in optoelectronics are defective or the motor will not turn. Check the optoelectronic card connection. Also, check the electrical part.
What does Err 7 mean on Sicam Wheel Balancers?
If your Sicam Wheel Balancer displays Err 7, it indicates a large phase difference between the two pick-ups. First, check that the calibration weight has been correctly applied. Next, check the machine location, ensuring it is stable and not vibrating excessively. If the problem persists, check the sensor and electronic card connections, replacing them if necessary. Finally, replace the pick-ups; if the problem is still not solved, replace the card.
How to troubleshoot Err 3 on Sicam Wheel Balancers?
If your Sicam Wheel Balancer displays Err 3, it could be because the wheel was rotating backwards on start-up or the motor winding is inverted. Ensure the wheel is still before starting and avoid rotating it backwards. Also, check the motor connection to ensure it is correct.
What causes Err 20 on Sicam SBM 155?
If your Sicam Wheel Balancer displays Err 20, it could be due to the brake pedal being operated during measurement or irregular motor rotation speed. Avoid pressing the brake pedal while the motor is running. Also, avoid knocking the machine during the measuring cycle and check the mains voltage, as it might be low.
What does Err 5 mean on Sicam SBM 155 and how to fix it?
If your Sicam Wheel Balancer displays Err 5, it indicates that the calibration weight was not applied during the calibration process or the pick-ups are not connected. Repeat the calibration from the beginning, ensuring you apply the calibration weight when instructed. Also, check the pick-up connections to ensure they are properly connected.
Why does my Sicam SBM 155 Wheel Balancers show Err 6?
If your Sicam Wheel Balancer shows Err 6, it could be due to the guard not being lowered or a broken guard microswitch. Ensure the guard is lowered with the wheel mounted. If the guard is down, the microswitch might be broken and needs replacement.
What to do if my Sicam SBM 155 Wheel Balancers displays Err 4?
If your Sicam Wheel Balancer displays Err 4, it means the motor cannot reach the necessary revolutions for effective balancing. First, check the mains voltage, as it might be low. If the voltage is adequate, the electronic card or electrical plant may be malfunctioning and need replacement.
Detailed specifications of the wheel balancer, including dimensions, weight, and electrical data.
Identification of the main components of the wheel balancer shown in the illustration.
Details on dimensions, weight, electrical supply, and range of applications for the SBM 155.
List of accessories provided with the machine and those available upon request.
Instructions for unpacking, placement, safe distances, and fixing requirements.
Instructions for electrical hook-up, safety precautions, and manufacturer liability.
Steps for attaching various adapters and securing automobile and motorcycle wheels.
Explanation of the control panel layout, buttons, indicators, and their functions.
Step-by-step guide to performing wheel balancing, including program selection and data entry.
Procedures for programming adhesive weights, weight separation, and imbalance optimization.
Instructions for machine calibration, balancing checks, and auto-diagnosis functions.
Guide to using ALUDATA programs for balancing and setting wheel data.
Instructions for regular cleaning, user maintenance, machine handling, and storage.
Procedures for proper disposal of WEEE and environmental protection guidelines.
Information on obtaining technical support, ordering spare parts, and safety warnings.
Official document declaring the product's compliance with relevant European directives and harmonized standards.
General| Brand | Sicam |
|---|---|
| Model | SBM 155 |
| Category | Wheel Balancers |
| Language | English |
