Sicam SBM 99S - TECHNICAL CHARACTERISTICS

COD.642400 Rev. 1
5
TECHNICAL CHARACTERISTICS
The SBM 95 and SBM 99S are high performance machines:
• The use of microprocessors ensures high precision wheel balancing (see pg. 14).
• A system of auto fault-finding and auto setting makes maintenance extremely simple (see pg. 15).
• Operation is with a single automatic cycle which measures the imbalance of the two planes
simultaneously, memorizing the weight and the positioning. It has 5 aluminium programmes and a static
balancing programme.
• The wheel guard allows the fitting of wheels with an external diameter of up to 900 mm. When the
wheel guard is open an electrical switch prevents the machine from starting.
• The SBM 99S has a gauge for the automatic setting of wheel measurements.
TECHNICAL DATA
DIMENSIONS
Max. height ........................................................................
Depth .................................................................................
Width..................................................................................
WEIGHT
Net weight (with guard) .....................................................
Gross weight......................................................................
ELECTRIC MOTOR
Power ................................................................................
Phases...............................................................................
Power supply .....................................................................
(the machines are also available in mono-phase
versions)
Protection...........................................................................
Balancer speed .................................................................
Balancing precision............................................................
Noise level .........................................................................
SBM 95
1800mm.
1250mm.
850mm.
143 kg
166 kg
0.65 kW - 50Hz
3 ~
230-400V
IP 44
450 g/min
1 grammo
75 db
SBM 99S
1800mm.
1250mm.
900mm.
172 kg
202 kg
0.65 kW - 50Hz
3 ~
230-400V
IP 44
450 g/min
1 grammo
75 db
RANGE OF APPLICATIONS
SBM 95 and SBM 99S are a machines for
balancing vehicle tyres of up to 70 kg and motorcycle
tyres of up to 20 kg. The operating capacities are as
follows:
Rim width.............................................................................
Rim diameter .......................................................................
Max.wheel diameter ............................................................
Max. wheel weight ...............................................................
SBM 95
min/max
1" - 20"
10" - 24"
900mm
70 kg
SBM 99S
min/max
1"- 20"
10" - 24"
900mm
70 kg
N.B.
The minimum and maximum measurements above
refer either to a dynamic imbalance on the two
compensation planes, or to a single static imbalance.
The imbalance is shown by a three figure digital read
out in grams.
If an ounces read-out is required instead of grams,
the transformation is made by the micro-processor
(see fig. 16 on pg. 11).
The angular position is indicated by LEDs.
REGISTRATION PLATE DATA