Fig. B2 Fig. B3Fig. B1
ATTENTION: Strong magnets. Use caution attaching the pump to the aqaurium. Keep hands
and ngers clear.
8) Turn the pump so that the ow is directed where desired
9) Connect it to the electric network.
REGULAR MAINTENANCE
For the periodic maintenance, unplug the pump from the electric outlet and remove the pump
from the tank.
Clean the pump and the rotor at regular intervals. Lime build up or heavy detritus in the water
may necessitate more frequent cleaning. See diagram below.
Remove the screen 7 from the pump 5 with light pressure to the sides by pulling it down. Fig. B1
Rotate the front counterclockwise and remove the rotor. (Fig. B2 and Fig. B3).
Carefully clean the pump’s components with fresh water or using a soft brush with soap or vinegar.
Rinse all parts well before returning th pump to the tank.
After cleaning, re-assemble all components making certain the small black O-ring 3 is tted into its
proper position. If the O-ring is not properly seated the rotor may mak
e noise. Replace a lost or
damaged O-ring.
SICCE products are designed for a long life andhigh, reliable service. Nevertheless, wear over time
can create a little noise even after regular maintenance. Replacement parts are available.
To Next Page
Loading...
