Operating Instructions Chapter 3
ICR880/890
Product description
8011325/XL85/2013-08-20 © SICK AG · Germany · All rights reserved · Subject to change without notice 29
3.4.7 Image acquisition
The recorded image can be generated irrespective of the decoding result for further pro-
cessing via the GBit Ethernet interface. This enables, e.g., an analysis if decoding has been
unsuccessful.
s
If data processing has been successful (decoding), the marking of the corresponding image
areas can also be displayed.
The image format and the scaling/quality can be configured using the SOPAS-ET Configura-
tion Software:
P
ROJECT TREE, ICR880/890, PARAMETER, IMAGE OUTPUT, register tabs GENERAL, IMAGE FILENAME
and JPEG O
UTPUT
Decoding
The recorded image is analyzed by the ICR880/890 System. The results are shown as:
Blue retangles: regions of Interest
Green retangles: successful decoding
3.4.8 Code configuration
The ICR880/890 Camera System can decode the following code types:
1D codes (bar codes)
Codabar
Code 39
UPC/EAN family
2/5 Interleaved
Code 93
Code 128 family
2D codes
Data Matrix EEC200
Maxicode
PDF417
Fig. 3-9: Example of an image recording for analysis
To Next Page
Loading...