LEGEND
1. General switch: if it is lighted, it indicates that the appliance is on and ready to be used.
2. Sealing time: it allows to set up the sealing time depending on the thickness of the bag to be sealed.
3. Sealing indicator light: when the light is on, the packer is sealing a bag. When the light goes out, the
sealing process is finished.
4. Vacuum indicator: it indicates level of vacuum.
5. Jars/Bags Selector: it allows to program the packer to vacuum pack in Bags (Position II) or in Jars
(Position I).
6. Sealing start button : press and release when the vacuum indicator becomes green
7. Upper airtight basket:. it guaranties that vacuum will be maintained in the chamber.
8. Lower airtight basket: it guaranties that vacuum will be maintained in the chamber.
9. Silicone gasket: it presses the bag on the sealing bar.
10. Lid
11. Sealing bar: When the light is on, the sealing bar is sealing bags. Avoid touching the bar after sealing
to prevent burnings.
12. Pump protection filter: the filter gathers possible liquids and/or dust which could damage the pump. It
can be drawn out, cleaned and inserted properly.
13. Vacuum release button: it allows to release the lid after finishing the sealing.
14. Plastic bracket: it is used to stop the bag during vacuum process. It is extractable to cleen vacuum
chanber
15. Accessory port.
To Next Page
Loading...