9
Installation cont.
NOTE: The metal plate will be semi-permanently adhered to your laptop. If you
would not like the metal plate adhered directly onto your laptop, we recommend
using a plastic laptop case or skin.
Attach SideTrak Swivel onto laptop.
After giving the metal plate a few minutes to adhere, clip the monitor to the metal plate
on your laptop.
It is easiest to slip when the monitor and mounting frame aren’t folded. Wiggle the
monitor’s mounting frame, if it pops off it is not fully clicked in. You will hear a loud click
when it is properly placed. Then, simply plug in and you’ll be all set to start using your
new SideTrak monitor!
If you are setting up the triple screen, ip page for second metal plate placement before
attaching your Swivel.
Learn more about
setting up your
triple screen.
If you DID NOT purchase a triple screen pack, but have just installed a second plate for your
second monitor (purchased another SideTrak single to create a triple setup), ip to page 14
to adjust your monitors so they can nest close on your laptop for easy transport.
4
To Next Page
Loading...
