Need help?Do you have a question about the sidhil Inno V8 Low and is the answer not in the manual?
General| Type | Electric profiling bed |
|---|---|
| Weight Capacity | 250kg |
| Backrest Angle | 0° - 70° |
| Knee Break Angle | 0° - 30° |
| Trendelenburg/Reverse Trendelenburg | 12° |
| Brakes | Central braking system |
| Power Supply | 220V/50Hz |
Lists key electrical and mechanical features of the bed, including electric backrest, height, and tilt.
Explains the significance of warning and caution symbols used throughout the user manual.
Describes the intended applications and operational range of the bed for various patient needs.
Outlines the importance of performing patient-specific risk assessments before bed use.
Specifies the safe working load and maximum user weight for the bed.
Provides general safety warnings related to electrical beds, flammable gases, and cable management.
Explains key symbols found on the bed, including warnings, load capacity, and disposal information.
Lists checks to perform and warnings to heed during initial bed installation.
Provides general safety guidelines for operating the bed manually.
Explains how to operate the brake and steering functions of the bed.
Details the steps for engaging and disengaging the brake bar.
Lists essential checks required before moving the bed.
Discusses the types of side rails and their proper use.
Specifies maximum mattress thicknesses compatible with different side rail types.
Explains the correct procedure for raising and lowering the side rails.
Explains how to extend and retract the bed platform for increased length.
Describes the manual backrest leveling for emergency situations.
Explains how to safely remove the plastic bed end panels for patient access.
Describes the functions and operation of the nurse control panel (NCP).
Details the components, buttons, and indicators of the nurse control panel.
Explains how to activate, lock, and unlock bed functions via the NCP.
Details how to adjust the thigh section angle and foot section height.
Explains the auto contour feature for simultaneous backrest and knee break adjustment.
Explains how to operate the tilt function (Trendelenburg/reverse Trendelenburg).
Describes how to profile the bed into a cardiac chair position.
Explains the emergency CPR function for rapid flattening and lowering.
Explains the function and meaning of the mains power indicator light.
Explains the function and meaning of the battery indicator light.
Describes the patient handset and its limited controls for backrest, knee break, and height.
Details the optional night pack handset, including backlighting and under bed light.
Explains the antibacterial coating and its benefits against bacteria and fungi.
Provides detailed instructions for cleaning and disinfecting the bed.
Lists common electrical faults, their possible causes, and remedies.
Explains the procedure for resetting the bed's electrical system.
Outlines the recommended annual maintenance checks for the bed.
Lists the technical specifications of the bed, including dimensions and angles.
Provides detailed electrical specifications, safety standards, and environmental conditions.
Lists optional accessories available for purchase with the bed.
Outlines the terms, conditions, and duration of the product warranty.
To Next Page
