sidhil Artemis User Manual (English)

Other manuals for sidhil Artemis

Questions and Answers:

L
lopezangelaAug 10, 2025
What to do if my sidhil Artemis Medical Equipment mattress has low pressure?
- R
  Richard HartmanAug 10, 2025
  If you observe low pressure or incomplete inflation in your Sidhil medical equipment, follow these steps: 1. Ensure the mattress air connector is correctly connected to the control unit. 2. Ensure the CPR dial is closed to prevent air leakage. 3. Turn the unit off and then on again to clear the indicator. If a ‘low pressure’ indicator continues to illuminate: 4. Open the mattress and check for air leakage within the mattress cells, tubing, and connectors. 5. Turn the unit off and then on again to clear the indicator. If the low pressure indicator is still evident, turn off the power at the mains and contact your approved service provider.
A
anthonyjenningsAug 15, 2025
What to do if sidhil Artemis Medical Equipment shows a high pressure?
- A
  Alexander DelgadoAug 15, 2025
  If your Sidhil medical equipment indicates a high pressure, take the following steps: 1. Ensure the mattress umbilical is not trapped or being squeezed. 2. Open the mattress and make sure none of the air pipes are kinked. 3. Turn the unit off and then on again to clear the indicator. If a high pressure indicator is still evident, turn off the power at the mains and contact your approved service provider.
T
teresabarkerAug 21, 2025
What to do if my sidhil Artemis mattress disconnects?
- M
  Mary GutierrezAug 21, 2025
  If you are experiencing mattress disconnection issues with your Sidhil medical equipment, follow these steps: 1. Ensure the mattress air connector is correctly connected to the control unit. 2. Turn the unit off and then on again to clear the indicator. If the indicator is still evident, turn off the power at the mains and contact your approved service provider.

sidhil Artemis Specifications

General

Brand	sidhil
Model	Artemis
Category	Medical Equipment
Language	English

Summary

Contact Information

Service & Maintenance Contact

Contact details for service and maintenance.

Spares Contact

Contact details for spare parts.

Customer Service Contact

Contact details for customer service.

Product Description

Intended Environment

Intended use environment for the dynamic mattress system.

Intended Use

Purpose and application of the Artemis dynamic mattress system.

Product Features

Details of the mattress and control unit features.

Safety Information

Warnings and Cautions

Identifies potential hazards and equipment damage risks.

Risk Assessment Guidelines

Factors to consider for patient safety risk assessment.

Contraindications

Patient conditions where the mattress system is contraindicated.

Maximum Mattress Load

Specifies the maximum patient weight capacity.

General Safety Warnings

General safety precautions for operation, handling, and environment.

Transport and Storage

Storage Procedures

Procedures for safely storing the mattress system.

Transportation Guidelines

Guidelines for transporting the mattress system safely.

Environmental Conditions for Storage/Transport

Recommended ambient and humidity conditions for transport/storage.

Symbol Definitions

Hazard Warning Symbols

Symbols indicating potential hazards and mandatory instructions.

Equipment and Usage Symbols

Symbols for WEEE, no smoking, and type BF applied parts.

Mattress Care Symbols

Symbols related to mattress care and cleaning.

Parts Identification

Control Unit Components

Identification of components of the control unit.

Mattress Components

Identification of mattress parts and connectors.

Installation Guide

Installation Prerequisites

Ensure mains supply compatibility and avoid direct sunlight.

Mattress Placement and Securing

Guidance on placing mattress on bed and securing straps.

Handling Precautions

Avoid sharp objects to prevent mattress damage.

CPR Dial and Control Unit Placement

CPR dial position and control unit placement on the bed.

Air Hose and Cable Connections

Connecting air hose and routing mains cable correctly.

Initial Inflation Process

Plugging in and starting the mattress inflation process.

Final Mattress Securing and Bedding

Ensure mattress is secure and bedding doesn't impede function.

Electrical Safety During Installation

Warnings on mains plug, cable tension, extension cables, and socket placement.

Cable and Hose Positioning Safety

Minimise risk of strangulation from cables/hoses.

Heat and Fire Safety

Keep away from heat sources and naked flames.

Environmental Safety Precautions

Avoid direct sunlight and moisture-rich environments.

Operation

Operational Environmental Limits

Specifies ambient temperature, humidity, and pressure for operation.

Preparation for Use

Steps to prepare the system before patient use.

Control Interface Overview

Overview of the control panel buttons and their functions.

Mattress Overview

Describes the cell structure and inflation range of the mattress.

Turning the System On and Off

Procedure for powering the control unit on and off.

System Setup and Alternation

Automatic patient weight detection and 'AB' alternation cycle explanation.

Patient Weight and Pressure Adjustment

How the system determines patient weight and pressure.

Function Lock Feature

How to lock and unlock the control unit interface.

Muting Audible Signals

How to silence audible fault signals.

Therapy Mode Selection

Description of the available therapy modes.

Comfort Control Settings

Adjusting mattress softness/firmness (Soft, Medium, Firm).

Accessing Additional Settings

Accessing hidden menu for cycle time, auto lock, units, display, egress alert.

Cycle Time Adjustment

Setting the duration of the alternation cycle.

Auto Lock Configuration

Enabling or disabling the automatic interface lock.

Weight Unit Selection

Selecting display units for weight (kg or lbs).

Weight Display Toggle

Showing or hiding the weight indicator.

Egress Alert Function

Activating an alert for patient egress from the bed.

Auto Seat Mode Operation

Mattress function for profiled upright patient position.

Low Patient Weight Mode

Adjusting pressure for patients weighing less than 40kg.

CPR Rapid Deflation

Procedure for rapid deflation of the mattress.

Disconnecting Mattress and Power Interruption

Procedures for disconnecting the mattress or during power failure.

Using Incontinence Products

Guidance on using incontinence products with the system.

Decontamination and Cleaning

Control Unit Cleaning

Detailed cleaning procedure for the control unit.

Mattress Cover Cleaning

Cleaning and decontamination of the mattress cover.

Alternative Mattress Cover Laundering

Alternative method of cleaning the mattress cover via laundering.

Troubleshooting

Power Failure Issues

Symptoms, indications, and actions for power failure problems.

Inflation and Pressure Problems

Troubleshooting steps for inflation and pressure issues.

High Pressure Indicators

Troubleshooting steps for high pressure indications.

Mattress Disconnection Troubleshooting

Actions for mattress disconnection indicators.

Patient Bottoming Out Solutions

Steps to address patient bottoming out issues.

Maintenance

Maintenance Safety Precautions

Disconnect power, do not modify, vacate patient.

Approved Parts and Servicing Schedule

Use approved components; annual service recommended.

Periodic Maintenance Checks

Specific checks for air filter, electrical functions, battery, etc.

Disposal of Parts

Proper disposal procedures for the mattress system and components.

Specifications

Electromagnetic Compatibility (EMC)

EMC Emissions Requirements

Guidance on electromagnetic emissions and environments.

EMC Immunity Guidance

Immunity test levels and electromagnetic environment guidance.

RF Immunity and Separation Distances

RF immunity test levels and recommended separation distances.

Recommended Separation Distances Table

Table detailing separation distances based on transmitter power.

Warranty Information

Related product manuals

sidhil Inspiration Cot

16 pages

sidhil Artemis User Manual

Table of Contents