BAL S102 ANA M 1.0 31
Technical Data
Analog signal input
Resolution 16 Bit
Measurement rate ca. 4/s
Measurement error 0,02% of end value ±1 digit
(25 °C)
Temperature coefficient <50 ppm/°C
Current measurement
Input resistance approx. 22 Ω
Input range 0…±20 mA, max. ±100 mA
Voltage measurement
Input resistance approx. 100 kΩ
Input range 0...±10 V, max. ±40 V
LED display S102-xx/xx/0R-00x/0B-A0 red
S102-xx/xx/0G-00x/0B-A0 green
Number of digits S102-06/14/0x-00x/0B-A0 6 digits
S102-05/25/0x-00x/0B-A0 5 digits
Character height S102-06/14/0x-00x/0B-A0 14 mm
S102-05/25/0x-00x/0B-A0 25 mm
Power supply 24 V DC ±15 %, galvanically isolated,
protected against reversed polarity
Power consumption S102-06/14/0x-00x/0B-A0 approx. 4 VA
S102-05/25/0x-00x/0B-A0 approx. 4,5 VA
Connection technology Plug-in screw terminal strip
Protection type (front) S102-xx/xx/0x-000/0B-A0 IP40
S102-xx/xx/0x-001/0B-A0 IP65
Operating temperature 0...50 °C
Storage temperature -20...70 °C
Humidity max. 95 % (non-condensing)
Weight S102-xx/14/0x-00x/0B-A0 approx. 170 g
S102-xx/25/0x-00x/0B-A0 approx. 300 g
To Next Page
Loading...
