Siebert S302 Series User Manual

Series S302
Numeric large size displays
with PROFINET IO RT interface
Operating instructions

Siebert S302 Series Specifications

General

Refresh Rate	60 Hz
Display Type	LCD
Operating Temperature	0°C to 40°C
Protection Class	IP65
Input Ports	VGA, DVI

Summary

Safety Precautions

Safety Guidelines

Highlights electrical safety requirements for mounting and maintenance.

Quick Start: Numerical Operation (INT32 Format)

Step 3: Install GSDML and Add Display

Installs GSDML file and adds the display module to the hardware catalog.

Step 4: Establish Connection to Display

Establishes the PROFINET connection between the display and the controller.

Step 5: Add Sub-module and Define Address Range

Adds 'Numerical Value' sub-module and defines the address range for INT32 format.

Step 6: Assign PROFINET Device Name

Assigns the IP address and PROFINET device name to the display.

Step 7: Download Configuration to Controller

Downloads the controller configuration, establishing PROFINET communication.

Step 8: Transmit Data to Display

Transmits numerical values to the display using a MOVE instruction.

Quick Start: Alphanumeric Operation (ASCII Format)

Step 5: Add Text and Attribute Sub-module

Adds 'Text and attribute' sub-module for ASCII format and data mapping.

Step 8: Transmit Values and Texts

Transmits text strings and attributes to the display for alphanumeric mode.

Setting Display Settings During Initialization (Numeric Mode Only)

Offset, Scale Factor, and Divisor

Flashing Modes and Display Attributes

Flags Overview

Setting Display Mode in Normal Operation

Technical Data