BAL S302 PFN RT 1.00 20/27
Flags
11 Flags
Circumferential frame off
Invalid initial value off
The decimal places are trancated.*
The decimal places are rounded up*
The decimal places are rounded down.*
The decimal places are rounded commercially.*
Value is displayed in decimal form
Value is displayed in hexadecimal form
Without function. The bits are to be set to '0
* only with activated Smart-Dot-Function
Leading zeros
On the places in front of the value is shown automatically
Smart-Dot-Function
The display automatically moves the decimal point so that the decimal value is displayed completely
when the value exceeds the maximum display capacity.
Invalid initial value
If the value sent to the display is invalid, is shown on each position.
Overflow
If the value sent to the display is that large that it cannot be displayed on the display is shown on
each position on the upper segments.
If the overflow function is deactivated, the value that can be displayed as large as possible is
displayed for a larger number than can be displayed. For example: numbers larger or equal 9999 are
always displayed with '9999' on a four-digit display.
Underflow
If the value sent to the display is that small that it cannot be displayed on the display is shown on
each position of the lower segments.
If the underflow function is deactivated the value that can be displayed as small as possible is
displayed for a smaller number than can be displayed. For example: numbers smaller or equal -9999
are always displayed with '-999' on a four-digit display.
Circumferential frame
Until user data is received for the first time the display alternately displays or various status
messages on its display.