Siebert S302 Series - Table of Contents

BAL S302 PFN RT 1.00 4/27
Table of contents
1 Contact 2
2 Legal note 3
3 Safety precautions 6
Important information ......................................................................................................................................... 6
Safety ................................................................................................................................................................. 6
Intended use ....................................................................................................................................................... 6
Mounting and installation .................................................................................................................................... 6
Grounding ........................................................................................................................................................... 6
EMC measures ................................................................................................................................................... 7
Disposal .............................................................................................................................................................. 7
4 Model designation 8
Model designation .............................................................................................................................................. 8
Unit construction ................................................................................................................................................. 8
5 Quick start for numerical operation mode (INT32 format) 9
Step 1: Open project .......................................................................................................................................... 9
Step 2: Switch to project view ............................................................................................................................ 9
Step 3: Install the GSDML file of the ad and add the display ............................................................................. 9
Step 4: Establish a connection to the display ................................................................................................... 10
Step 5: Add sub-module to the display and define address range .................................................................. 10
Step 6: Assign a PROFINET device name to the display ................................................................................ 11
Step 7: Download configuration in the controller.............................................................................................. 11
Step 8: Transmit data to the display ................................................................................................................. 12
6 Quick start for alphanumeric operation mode (ASCII format) 13
Step 1 to 4: See quick start for numeric operation mode (INT32 format) ........................................................ 13
Step5: Add sub-module to the display and define address range ................................................................... 13
Step 6 and 7: See quick start for numeric operation mode (INT32-Format) .................................................... 13
Step 8: Transmit values and texts to the display .............................................................................................. 13
7 Messages on the display 15
8 Further settings 16
9 Setting the display settings during initialization (numeric operation mode only) 17
Decimal points ................................................................................................................................................. 17
Offset, scale factor (multiplier) and divisor ...................................................................................................... 17
Threshold values Range ................................................................................................................................. 17
Flags ................................................................................................................................................................ 17
Attributes for flashing and blinking ................................................................................................................... 18
Format .............................................................................................................................................................. 18
10 Flashing modes and display attributes 19