Sieg Super C3 User Manual

© Arc Euro Trade Ltd, England 2014
© Arc Euro Trade Ltd, England 2014
- 1 -
Arc Euro Trade Ltd.
10 Archdale Street, Syston, Leicester, LE7 1NA.
Web: www.arceurotrade.co.uk Phone: 0116 269 5693.
A picture story book to help you improve your
SIEG Super C3 Mini Lathe with a pair of half nuts
SIEG Super C3 Mini Lathe
Half Nut Conversion Guide

Sieg Super C3 Specifications

General

Brand	Sieg
Model	Super C3
Category	Lathe
Language	English

Summary

Introduction to Half Nut Conversion

Applicable SIEG Lathe Models

Lists the SIEG lathe models compatible with this half nut conversion guide.

Disassembly and Component Preparation

Removing Existing Leadscrew Cover and Apron

Disassemble the leadscrew cover, bracket, and apron assembly from the lathe bed.

Apron Internal Disassembly and New Half Nut Installation

Remove apron components, install new half nuts, and lubricate slides.

Reassembly and Adjustment

Reassembling Apron and Leadscrew Bracket

Refit gib retaining screws, adjust gib screws, and reassemble apron components.

Final Alignment and Testing

Position apron, tighten screws, adjust half nuts, and test operation.