Sieg Super C3 - Reassembly and Adjustment; Reassembling Apron and Leadscrew Bracket

© Arc Euro Trade Ltd, England 2014
© Arc Euro Trade Ltd, England 2014
- 4 -
13. Re-fi t the gib retaining screws and washers.
15. Check the operation of the handle for a smooth action.
17. The fi nished apron assembly.
19. Loosely fi t the apron fi xing screws.
14. Adjust the gib screws.
16. Check there is no slop in the half nuts.
18. Slide the apron back into position.
20. Re-fi t the leadscrew bracket with the screws fi nger tight.